Hexagon Geospatial
MENU

ERDAS IMAGINE

Discuss and share topics of interest using ERDAS IMAGINE the world’s leading geospatial data authoring system.
Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
Occasional Contributor
Posts: 19
Registered: ‎10-15-2018

Producing Point Cloud Data

I'm trying to produce point cloud data from overlapping sattelite images. I'm using IMAGINE photogrammetry for this process. I am using enchanced ATE process. I want to produce a 6 points per square meter point cloud data. Could you please suggest the right parameters to achieve my desired output.

Staff
Posts: 221
Registered: ‎10-21-2015

Re: Producing Point Cloud Data

Hello,

 

In eATE you can either define “Point Sampling Density” in Process Engine Settings if you want to use pixel-wise matching. Or, if you want to match at a regular interval in ground space you can use “Match Density” in output settings. To use match density, you need to uncheck “Image Space” in Process Engine Settings.

 

Depending on the image Ground Sampling Distance you can estimate your point cloud density. For example if you have 10cm GSD and you want a point in every 10cm set Point Sampling Density to 1, if you want a point in every 40cm then set Point Sampling Density to 4 (every 4 pixels) and if you want a point in every 1 meters (every 10 pixels) then set the Point Sampling Density to 8 which is the next available value below 10.

 

Best regards,

Yasemin

Do you need immediate support?
If you encounter a critical issue and need immediate assistance please submit a Service Request through our Support Portal.