09-20-2019 12:30 PM - edited 09-20-2019 04:27 PM
Hi, I generated a mosaic using MosaicPro, with multiple images in img format, I generated the output of the mosaic in ecw format, but the result is not good, the resolution of the final image is bad.
This is one of the original images.
And this is the ecw result
Note: The images come from UAVs, at 7cm/pxl, together they are + - 330 km2
Solved! Go to Solution.
09-23-2019 06:20 AM
What is your ECW target compression ratio? You should try using a lower compression ratio.
I would encourage you to perform some mosaic tests using a smaller subset of your data to find your optimal ECW compression ratio before mosaicking all of the images.
Hexagon Geospatial Support
09-23-2019 11:01 AM
Hi, thanks for the response,
I performed some tests in MosaicPro with two images, they were exported to ecw format correctly, but when loading all the images the problem continued.
The ratio is the default (20) in RGB.
I had to save the mosaic in IMG format, then export to ECW format, so the final mosaic is fine.
MosaicPro probably has some limitation with large tiles when exporting directly to ECW format or maybe the cache folder did not support it, but the computer never ran out of disk space.