12-10-2017 05:59 AM
I Am using ISSG 2016 in a workstation with a graphics card Nvdia Quadro FX 4800 and Graphics driver 266.45.I am facing a problem while opening a stereo pair in ISSG as "Overlay is not enabled" while i have configured all 3D settings.Anyone can help in this regard to solve thi issue.
12-11-2017 04:36 AM
From the NVIDIA Control Panel, under Manage 3D Settings, be sure to set the Global presets to "Intergraph ISSD." That should automatically enable the use of overlay planes and set some other needed parameters in the background. After that, set Stereo Display to On, and set the Stere - Display Mode to On-board DIN connector (with NVIDIA 3D Vision), then click Apply.
12-11-2017 05:07 AM
12-11-2017 05:19 AM
Hmmm, yes, your settings look correct. Is this a system that was working and now is not? Or a new system that you are trying to port the graphics to? What O/S version is the system?
12-11-2017 05:41 AM
So I read this to mean that the system was working and now suddenly is not. It is quite possible that the graphics card is failing. I've attached a zip file with a simple executable and instructions for testing the card. Please run it. If it works properly then there is something wrong from a s/w installation standpoint, if it fails it likely means the card is on its way out.